NUUT

Happy New Year to one and all!

From everyone at NUUT, we wish you the very best. Thank you so much for supporting us throughout last year and the ones before. Our web shop is closed but our tech service will still be available to you. techservice@nwtcycletronic.com

We invite you to visit us at NWTCYCLETRONIC.com for our launch next season.

If you need a system...

Go over to the guys at BRICK HOUSE BUILDS, KILTED BUSHIDO BUILDS and NEVER ENDING CYCLES as we are sold out and will be launching a new line up in March. They have limited quantities as well.

MORTY

Complete wiring system

For use with STANDARD style handlebar switch

Features:

  • 8-bit RISC dual micro controller operation
  • Double layer precision surface mount PCB board
  • Auto reset fuse protection with 3000volt surge protection on input
  • AC runaway voltage protection
  • Individual auto reset fuse protection on all output channels
  • Solid state MOSFET transistor operation
  • Power up visual indicator
  • Onboard user control variable rate digital signal light flasher
  • Auto dimming headlight during signaling with user select control
  • Master headlight control
  • Protected horn output
  • Dedicated taillight & brake light output with 2 user select pattern
  • Brake Light Auto Hold
  • Automated flash to pass
  • Dedicated engine power output with fault protection
  • Multiplex low level logic inputs
  • Starter relay output with neutral safety and clutch safety
  • Dedicated dash light/indicator outputs
  • Waterproof and shockproof
  • Easy screw terminal connections
  • 2 years replacement warranty

MORTY Pack A

MORTY unit + Switch assembly with SINGLE CABLE THROTTLE ALLOCATION

MORTY Pack B

MORTY unit + Switch assembly with SINGLE CABLE THROTTLE ALLOCATION

MORTY Pack C

MORTY unit + Switch assembly with DUAL CABLE THROTTLE ALLOCATION

MORTY Pack D

MORTY unit + Switch assembly, NO THROTTLE ALLOCATION

MORTY Pack E

MORTY unit + HD style switch assembly for 1 inch (25mm) HANDLEBARS ONLY!

VIEW/DOWNLOAD

MORTY INSTALL DIAGRAM

MARTY

Complete wiring system

For use with MOMENTARY PUSH BUTTON style handlebar switch

Features:

  • 8-bit RISC micro controller operation
  • Double layer precision surface mount PCB board
  • Auto reset fuse protection with 3000volt surge protection on input
  • AC runaway voltage protection
  • Individual auto reset fuse protection on all output channels
  • Solid state MOSFET transistor operation
  • Power up visual indicator
  • Onboard user control variable rate digital signal light flasher with timeout (3.5 minute)
  • Intelligent signal light direction change-over
  • Auto dimming headlight during signaling with user select control
  • Protected horn output
  • Dedicated taillight & brake light output
  • Automated flash to pass
  • Dedicated engine power output with fault protection
  • Multiplex low level logic inputs
  • Starter relay output with neutral safety and clutch safety
  • Dedicated dash light/indicator outputs
  • Waterproof and shockproof
  • Easy screw terminal connections
  • 2 years replacement warranty

MARTY Pack A (white)

MARTY unit + 6 individual plastic buttons, DIY KIT, NO HOUSING

MARTY Pack A (blue)

MARTY unit + 6 individual plastic buttons, DIY KIT, NO HOUSING

MARTY Pack A (black)

MARTY unit + 6 individual plastic buttons, DIY KIT, NO HOUSING

MARTY Pack B (red)

MARTY unit + 6 individual metal buttons, DIY KIT, NO HOUSING

MARTY Pack B (silver)

MARTY unit + 6 individual metal buttons, DIY KIT, NO HOUSING

MARTY Pack C (blue)

MARTY unit + Switch assembly

MARTY Pack C (black)

MARTY unit + Switch assembly

MARTY Pack D (multi)

MARTY unit + Switch assembly

MARTY Pack D (blue)

MARTY unit + Switch assembly

MARTY Pack D (gold)

MARTY unit + Switch assembly

MARTY Pack D (green)

MARTY unit + Switch assembly

MARTY Pack D (red)

MARTY unit + Switch assembly

MARTY Pack E (sMulti)

MARTY unit + Switch assembly

MARTY Pack E (sBlack)

MARTY unit + Switch assembly

MARTY Pack E (sBlue)

MARTY unit + Switch assembly

MARTY Pack E (sGold)

MARTY unit + Switch assembly

MARTY Pack E (sRed)

MARTY unit + Switch assembly

MARTY Pack E (blue)

MARTY unit + Switch assembly

MARTY Pack E (gold)

MARTY unit + Switch assembly

MARTY Pack E (green)

MARTY unit + Switch assembly

MARTY Pack E (red)

MARTY unit + Switch assembly

MARTY Pack E (silver)

MARTY unit + Switch assembly

MARTY Pack E (silverDome)

MARTY unit + Switch assembly with domed buttons

VIEW/DOWNLOAD

MARTY INSTALL DIAGRAM

TRICKY

Complete wiring system

For use with only 2 MOMENTARY PUSH BUTTON style handlebar switch

Features:

  • 8-bit RISC micro controller operation
  • Double layer precision surface mount PCB board
  • Auto reset fuse protection with 3000volt surge protection on input
  • AC runaway voltage protection
  • Individual auto reset fuse protection on all output channels
  • Solid state MOSFET transistor operation
  • Power up visual indicator
  • Onboard user control variable rate digital signal light flasher with timeout (3.5 minute)
  • Intelligent signal light direction change-over
  • Auto dimming headlight during signaling with user select control
  • Protected horn output
  • Dedicated taillight & brake light output
  • Dedicated engine power output with fault protection
  • Multiplex low level logic inputs
  • Starter relay output with clutch safety
  • Waterproof and shockproof
  • Easy screw terminal connections
  • 2 years replacement warranty

TRICKY Pack A

TRICKY unit + 2 individual buttons, DIY KIT, NO HOUSING

TRICKY Pack B

TRICKY unit + switch assembly

TRICKY Pack C (sBlack)

TRICKY unit + switch assembly

TRICKY Pack C (black)

TRICKY unit + switch assembly

TRICKY Pack D (red)

TRICKY unit + switch assembly

TRICKY Pack D (gold)

TRICKY unit + switch assembly

TRICKY Pack E (black)

TRICKY unit + switch assembly

TRICKY Pack F (sGreen)

TRICKY unit + switch assembly

TRICKY Pack F (blue)

TRICKY unit + switch assembly

TRICKY Pack F (green)

TRICKY unit + switch assembly

TRICKY Pack F (silver)

TRICKY unit + switch assembly

TRICKY Pack F (black)

TRICKY unit + switch assembly

VIEW/DOWNLOAD

TRICKY INSTALL DIAGRAM

Contact our tech via techservice@nwtcycletronic.com

for your personal wiring diagram and other related install assistance.

Scroll to Top